Submissions

Online Submissions

Already have a Username/Password for JURNAL TEKNIK INFORMATIKA?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

AUTHOR GUIDELINES OF JURNAL TEKNIK INFORMATIKA

 

MANUSCRIPT GENERAL GUIDELINES

  

  1. The authors must follow the given template which can be download in Jurnal Teknik Informatika website. download here.
  2. The manuscript must not contain any plagiarism element.
  3. The manuscript is in Indonesian or English and at least 10 pages length.
  4. It is typed using A4 size paper (210 mm x 297 mm) in two columns from the second page with upper, lower, right and left margins are 2.5 cm wide.
  5. In the middle of the first page contains the title of the manusscript in capitals and 12pt size.
  6. Under the title lies two abstracts content (in English and Indonesian) and the keywords from each abstract.
  7. The manuscript is typed using one space size, and Times New Roman font.
  8. The submitted manuscript should be in Microsoft Word document, not in PDF or other form.

 

MANUSCRIPT BODY TEXT GUIDELINES

 

A. ABSTRACT

 Abstract is a synopsis of the work containing the problems studied, the purpose of research, information and methods used to solve problems, and conclusions. Abstracts are limited to 200 words and should not contain references, equations, figures, and tables. It only has ONE PARAGRAPH without any tab. The font size for abstracts and keywords is 11pt. Keywords are separated by comma (,). It contains no more than six (6) words, but the minimum is three (3) words.

 

 

B. INTRODUCTION

 In Introduction Chapter, Authors should state the objectives of the work at the end of introduction section. Before the objective, Authors should provide an adequate background, and very short literature survey in order to record the existing solutions or method, to show which is the best of previous researches, to show the main limitation of the previous researches, to show what do you hope to achieve (to solve the limitation), and to show the scientific merit or novelties of the manuscript.

Please also add at the end of the introduction, a statement that this manuscript is the original result of your research or the development of previous research using your own ideas. Manuscripts that you submit, will be examined partially or completely with plagiarism checker software.

 

C. LITERATURE STUDY

 This chapter consist of theoretical background and specific terminologies of your research. It can help the readers from several backgrounds can understand the manuscript content easier. The citations in Literature Study are written for example: “… are used as research objects [1]”. The quotations are mentioned in References chapter and organized in the order in which you mention them in your manuscript.

 

D. METHODS

 The methods described in this section are scientific and should make the reader repeat the experiment you are doing. Provide sufficient detail for the results of the study to be reproduced. The published method should be indicated with the appropriate reference in the References section. If there are relevant modifications, they should also be explained.

 

E. RESULTS AND DISCUSSION

 The research results of the study should be explained clearly and concisely. The result should summarize the findings (scientific) rather than providing the data in great detail. Please explain the difference between your results or your findings and previous publications by other researchers. The discussion should explore the significance of your work. Give quotes from previous studies that can support the results of your research.

 

 F. CONCLUSION

 

 The closing section is in paragraph form and should answer the purpose of the study, telling how your work can advance the current knowledge. Without a clear conclusion, reviewers and readers will find it difficult to assess the work, and whether it needs to be published in a journal or not. Do not repeat the results that have been displayed in the abstract, or only the experimental results. Provide clear scientific justification of your work and show possible apps and extensions. You should also suggest future research and/or ongoing research.

 

G. REFERENCES

 Citation to other writing sources mentioned by author in the manuscript should be adjusted to the References chapter sorted by the occurrence of the quotation, not by alphabet. To make things easier, we recommend using MENDELEY software facility as references manager or using the REFERENCES Menu and the BIBLIOGRAPHY submenu available in Microsoft Word.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. Manuscript is not being submitted, or peer reviewed to other scientific journal.

    The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.

    Every article submitted to METALURGI shall use reference management software e.g. Mendeley. use IEEE citation style. Download Here

     

  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
 

Copyright Notice

1. As an author you (or your employer or institution) may do the following:

  • Make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
  • Make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
  • Present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
  • For your employer, if the article is a ‘work for hire’, made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
  • Retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
  • Include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
  • Use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
  • May reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the author’s personal use or for company use, provided that the source and the copyright notice are indicated, the copies are not used in any way that implies JTI endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
  • All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the article’s publication in the journal.

2. Requests from third parties

  • Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use. Requests for all uses not included above, including the authorization of third parties to reproduce or otherwise use all or part of the article (including figures and tables), should be referred to JTI by going to our website at  http://journal.uinjkt.ac.id/index.php/ti.

3. Author Online Use

  • Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from JTI, provided that the posted version includes a prominently displayed JTI copyright notice and, when published, a full citation to the original publication, including a link to the article abstract in the journal homepage. Authors shall not post the final, published versions of their papers;
  • Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the author’s personal web site or the servers of the author’s institution or company in connection with the author’s teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;

4. Articles in Press (AiP) service

  • JTI may choose to publish an abstract or portions of the paper before we publish it in the journal. Please contact our Production department immediately if you do not want us to make any such prior publication for any reason, including disclosure of a patentable invention.

5. Author/Employer Rights

  • If you are employed and prepared the article on a subject within the scope of your employment, the copyright in the article belongs to your employer as a work-for-hire. In that case, JTI assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.

6. JTI Copyright Ownership

  • It is the formal policy of JTI to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the JTI, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. 

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Submission Free: 0.00 (IDR)

Article Publication Free: 0.00 (IDR)
If this paper is accepted for publication, you didn't charge to pay an Article Publication Fee to cover publications costs.