IMPLEMENTASI MCCALL’S FRAMEWORK DALAM PENGUJIAN KUALITAS PERANGKAT LUNAK (STUDI KASUS PORTAL KULIAH KERJA NYATA UNIVERSITAS RIAU)
DOI:
https://doi.org/10.15408/jti.v13i2.16986Keywords:
Quality testing, Software Quality, Kukerta, McCall’s FrameworkAbstract
Quality test is a crucial phase in the system development process to ensure that system work as its requirement. Therefore, the Portal Kukerta (Kuliah Kerja Nyata) Universitas Riau, an information system to manage data and activities of Kukerta, needs to assess. In this research, Portal Kukerta has been assessed using the McCalls software quality framework. The aspect that is focused on this research is product operation. Product operation consists of correctness, usability, integrity, reliability, and efficiency. The data collected by distributing questionnaires to 67 participants. The results show that users give a positive response to two aspects, namely efficiency 99.90% and usability 64%. However, for the reliability factor 43%, correctness 48%, integrity 56% get a neutral value that there are aspects that are considered less by the user. Based on these results, it can be concluded that the Kukerta portal is very efficient in managing the data of Kukerta University of Riau and can be easily used by users. However, in terms of reliability, correction, and integrity need to be improved. The implication of the research are (1) providing a reference in assessing quality of a software and (2) specifically providing a recommendation for Portal Kukerta Universitas Riau for their system improvements.
References
H. Al Fatta, at al., "Analisis dan perancangan sistem informasi untuk keunggulan bersaing perusahaan dan organisasi modern," Yogyakarta: Penerbit Andi, 2007.
Muslihudin, "Analisis dan perancangan sistem informasi menggunakan model terstruktur dan UML," Yogyakarta: Penerbit Andi, 2016.
Yurindra, "Software engineering - pendekatan model proses pengembangan perangkat lunak pendekatan proses kematangan & penilaian perangkat lunak," Yogyakarta: Deepublish, 2017.
F. Fandatiar, et al., “Rancang bangun sistem informasi kuliah kerja nyata (KKN) pada universitas muria kudus,” J. SImetris, vol. 6, no. 1, 2015.
V. A. Muwisnawangsa, “Analisis pengelompokan mahasiswa KKN berdasarkan kriteria jenis kelamin, fakultas dan sekolah,” J. Komputasi, vol. 5, no. 1, 2017.
F. H. Sibarani, “Evaluasi kualitas iraise UIN Suska Riau berdasarkan Mccalls’s quality model,” Universitas Islam Negeri Sultan Syarif Kasim Riau, 2018.
G. Fandatiar, et al., “Rancang bangun sistem informasi kuliah kerja nyata (KKN) pada Universitas Muria Kudus,” Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 6, no. 1, pp. 129–136, 2015.
S. Wiyono, et al., “Aplikasi penilaian kuliah kerja nyata Universitas Trunojoyo Madura menggunakan metode rating scale,” J. Ilm. Rekayasa, vol. 10, no. 1, p. 23, 2017.
M. M. K. MZ, “Pengujian perangkat lunak metode black-box berbasis equivalence partitions pada aplikasi sistem informasi sekolah,” MIKROTIK, J. Manaj. Inform., vol. 6, no. 1, 2016.
A. Rouf, “Pengujian perangkat lunak dengan menggunakan metode whitebox dan blackbox,” HIMSYATECH, vol. 8, no. 1, 2012.
T. S. Jaya, “Pengujian aplikasi dengan metode blackbox testing boundary value analysis (studi kasus: kantor digital Politeknik Negeri Lampung),” J. Inform. J. Pengemb. IT, vol. 3, no. 1, pp. 45–48, 2018.
W. Wibisono and F. Baskoro, “Pengujian perangkat lunak dengan menggunakan model behaviour UML,” JUTI, J. Ilm. Teknol. Inf., vol. 1, no. 1, pp. 43–50, 2002.
H. T. Hidayat and H. Husaini, “Uji kelayakan sistem informasi akademik menggunakan faktor kualitas Mccall,” in Prosiding Seminar Nasional Politeknik Negeri Lhokseumawe, vol. 2, no. 1, 2019.
W. Nugrahani, “Pengujian perangkat lunak menggunakan metode Mccall pada sistem informasi akademik Sekolah Tinggi Teknologi Adisutjipto Yogyakarta,” UIN Sunan Kalijaga, Yogyakarta, 2016.
A. Hidayati, et al., “Analisa kualitas perangkat lunak sistem informasi akademik menggunakan Mccall,” J. MULTINETICS, vol. 3, pp. 47–51, 2017.
A. Mulyanto, “Pengujian sistem informasi akademik menggunakan Mccall’s software quality framework,” JISKA (Jurnal Inform. Sunan Kalijaga), vol. 1, no. 1, 2016.
E. Susanti, “Penilaian kualitas usability e-learning menggunakan metode Mccall (studi kasus: STMIK Amikom Yogyakarta),” TEKINFO - J. Ilm. Tek. Ind. dan Inf., vol. 5, no. 2, pp. 65–93, 2017.
K. Khairullah, et al., “Pengukuran kualitas sistem informasi inventaris aset Universitas Muhammadiyah Bengkulu menggunakan metode Mccall,” Inf. Interaktif, vol. 2, no. 2, pp. 84–92, 2017.
Suryabrata, "Metodologi penelitian," 2nd ed. Jakarta: Rajawali Press, 2015.
F. Rahmawati, et al., “Quality testing of order management information system based on mccall’s quality factors,” IJID (International J. Informatics Dev., vol. 5, no. 2, pp. 12–20, 2016.
