PENGARUH GEOLOGICAL STRENGTH INDEKS (GSI) TERHADAP KESTABILAN LERENG TAMBANG BATU GAMPING PT CICATIH PUTRA SUKABUMI
Abstract
Full Text:
PDFReferences
Arif, I. 2016. Geoteknik Tambang. Gramedia Jakarta: Pustaka Utama.
Bieniawski, Z. T. 1989. Engineering Rock Mass Classification. A Wiley-Interscience Publication: Canada.
Bowles, J. E. 1984. Physical and Geotechnical Properties of Soils. McGraw-Hill Book Company.
Brady, B. H. G., & Brown, E. T. 2004. Rock Mechanics for Underground Mining Third Edition. Kluwer Academic Publisher: Boston, USA.
Effendi, A. C., Kusnama, Hermanto, B. 1998. Geologi Lembar Bogor, Jawa Barat. Pusat Penelitian dan Pengembangan Geologi.
Hoek, E. 1994. Strength of Rock and Rock Masses. ISRM News Journal: 2: 4-16.
Hoek, E. 1998. Realibility of Hoek Brown Estimate of Rock Mass Properties and Their Impact on Design. Int. J. Rock Mech. Min Sci.
Hoek, E. Karzulovic, A. 2000. Rock Mass Properties for Surface Mines. Society for Mining, Mettalurgical an Exploration (SME). Littleton: Colorado.
Hoek, E., Brown. 2022. RocLab: Rock Mass Strength Analysis Using The Hoek Brown Failure Criterion. Rocscience Inc: Canada.
Hoek, E., Carranza-Torres, C. And Corkum, B. 2002. Hoek Brown Failure Criterion-2002 Edition. Proc. North Am. Rock Mech. Soc. Meeting, Toronto, Canada.
Hoek. E. Brown, E.T. 1980. Underground Excavation In Rock. Instn Min. Mettal: London.
Marinos. P., Hoek, E. 2005. The Geological Strength Index: Applications and limitations.
Palmstrom, A. 1982. The Volumetric Joint Count – A Useful and Simple Measure of The Degree of Rock Mass Jointing. Proc. of the 4th Congr. Int. Assoc, of Engng. Geology, 2(3), 221-228.
Pangular, D. 1985. Petunjuk Penyelidikan dan Penanggulangan Gerakan Tanah. Pusat Penelitian dan Pengembangan Pengairan, Balitbang Departemen Pekerjaan Umum.
Priest, S. D. 1993. Discontinuity Analysis for Rock Engineering. Chapman & Hall.
PT Cicatih Putra Sukabumi. 2018. Dokumen Studi Kelayakan PT Cicatih Putra Sukabumi. Sukabumi; Jawa Barat.
Rai, M.A., Wattimena, R.K., Kramadibrata, S. 2014. Mekanika Batuan. Institut Teknologi Bandung.
Salain, I.M.A.K., 2009. Pengaruh Jenis Semen dan Jenis Agregat Kasar Terhadap Kuat Tekan Beton. Jurnal Teknologi dan Kejuruan, .32 (1).
Setyowati, I. 2008. Analisis Kualitas Batugamping Sebagai Bahan Baku Utama Semen Portland pada PT Semen Tonasa Provinsi Sulawesi Utara.
Sonmez, H., Ulusay, R. 1999. Modification of The Geological Strength Index (GSI) and Their Applicability to Stability of Slopes.
Sugiyono. 2010. Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.
Sukandarrumidi. 2018. Bahan Galian Industri. Yogyakarta: UGM Press.
DOI: https://doi.org/10.15408/jipl.v3i1.32737 Abstract - 0 PDF - 0
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Alfian Adhi Nugroho
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.