Water Level Detection System based on Arduino and LabVIEW for Flood Monitors using Virtual Instrumentation

Sabar Sabar, Dewi Maulidah Nur Anjani, Sastra Kusuma Wijaya

Abstract


This virtual instrumentation system based on Arduino and LabVIEW aims to detect the water level using a water level sensor. The water level sensor used to measure the water level is the Funduino type. This sensor and the buzzer module are connected to the Arduino Uno to transmit data to LabVIEW. When the water has reached a certain height, this sensor will detect the water level. When the water has reached the set point, this sensor will sound a buzzer as a sign that the water is full. Based on the experimental results, it is found that the tension value affects the volume of the experiment site. Where the greater the volume used will produce a large voltage, and vice versa. Furthermore, the graph results obtained that are still away from the linearity of a regression function with a value of y = 0.0079x + 1.8561 and R² = 0.4298.

Keywords


Arduino; Water Level Sensor; LabVIEW

Full Text:

PDF

References


K. Saleh, Fauziyah, Hadi, and Freddy, “Sistem Pemantauan Ketinggian Permukaan Air Berbasis Mikrokontroler Basic Stamp-2 Menggunakan Memory Stick Sebagai Penyimpan Data,” Pros. Semirata FMIPA Univ. Lampung, pp. 511–515, 2013.

Y. Al Hakim, “Pengembangan Automatic Water Level Recorder ( AWLR ) untuk Flood Early Warning System ( FEWS ),” 5th URECOL PROCEEDING, no. February, pp. 1602–1606, 2017.

H. I. Azeez, N. Pimkumwong, and S.-C. Chen, “Automatic water level control using LabVIEW,” Kurdistan J. Appl. Res., vol. 2, no. 3, pp. 369–375, 2017, doi: 10.24017/science.2017.3.28.

Charles A et all, “IOT BASED WATER LEVEL MONITORING SYSTEM USING LABVIEW,” Int. J. Pure Appl. Math., vol. 118, no. 20, pp. 9–14, 2018.

S. Sumathi and P. Surekha, LabVIEW based advanced instrumentation systems. 2007.

Y. P. Wijaya, “Simulasi Pengendalian Volume Tangki menggunakan LabVIEW dan Arduino UNO,” J. Sains dan Teknol. Ind., vol. 13, no. 1, pp. 79–82, 2016, [Online]. Available: http://ejournal.uin-suska.ac.id/index.php/sitekin/article/view/1293.

G. Nikolov and B. Nikolova, “Virtual techniques for liquid level monitoring using differential pressure sensors,” Recent J., vol. 9, no. September 2015, p. 2, 2008.

Sabar, A. H. Saputro, and C. Imawan, “Moisture Content Prediction System of Dried Sea Cucumber (Beche-de-mer) Based on Visual Near-Infrared Imaging,” Proc. 2019 6th Int. Conf. Instrumentation, Control. Autom. ICA 2019, no. August, pp. 167–171, 2019, doi: 10.1109/ICA.2019.8916705.

Sabar, A. H. Saputro, and C. Imawan, “Salt Content Prediction System of Dried Sea Cucumber (Beche-de-mer) Based on Visual Near-Infrared Imaging,” 2019 4th Asia-Pacific Conf. Intell. Robot Syst. ACIRS 2019, pp. 245–249, 2019, doi: 10.1109/ACIRS.2019.8935953.




DOI: https://doi.org/10.15408/fiziya.v4i1.19808 Abstract - 0 PDF - 0

Refbacks

  • There are currently no refbacks.


Web Analytics Made Easy - StatCounterView My Stats

Flag Counter

Creative Commons License

This work is licensed under a CC-BY-SAÂ